How are metal detector test samples used?

Ferrous (FE), non-ferrous (NFE), and stainless steel (SS) samples should each be placed in the center of your product, which then passes through the center of the metal detector. If the detector is properly calibrated, the sample will be detected and rejected. Repeat this process with all three samples.

How often should the metal detector be challenged with the test samples?

Refer to your companyâ€™s HACCP plan for requirements. We recommend testing before production, after production, and every hour during production. Frequent testing minimizes potential recalls if the detector malfunctions.

How often do the metal detector test pieces need to be replaced?

Replace test samples about every 5 years, depending on wear and tear. The spheresâ€™ characteristics do not change unless exposed to extreme conditions such as superheating or demagnetization.

How do you guarantee the correct sphere in each test standard?

Each sample is electromagnetically tested to confirm the correct sphere is embedded.

Should I use colored or white test samples?

Check your companyâ€™s HACCP procedures first. We recommend colored samples for contact with products. White samples contain FDA-approved paint lettering, but the paint could flake into your product.

Why do I need to test with three different types of metals?

Each metal type interacts with the magnetic field differently, and products can also affect the field. Testing with all three metals (FE, NFE, SS) ensures full accuracy.

Can you make custom test samples?

Yes! Please call the office at 864-836-3600 to discuss your requirements.

What size test standards do I need?

Sizes depend on your detectorâ€™s aperture width, height, and operating frequency. Refer to your manufacturerâ€™s documentation or customer requirements. If unsure, call 864-836-3600 for guidance.

What if the metal detector does not detect the test samples?

The sample size may be too small, or your detector may be out of calibration. Refer to the calibration section at www.fastecservices.com or call 864-836-3600 for technical support.

What are the samples made of?

They are made from FDA-approved acetal plastic. Certification is available upon request.

Do the test pieces come with any certifications?

Yes. All standards include a traceable lot number and a Certificate of Compliance (COC). Certificates can be downloaded at www.calibrationwands.com/certificates by entering your lot number.

Do you ship internationally?

Yes, international shipping is available through our webstore: www.calibrationwands.com.

What is the shipping time?

Most items are in stock and ship the same day. Orders must be placed by 12:00 PM EST for same-day shipping.

Do you offer wholesale discounts?

Yes. Please contact the office directly for details.

Fastec Services LLC

Shop Products
Certificates
About Us
- Now Hiring!!!
FAQ’s
Cart
My account

Toggle Menu

Shop Products
Certificates
About Us
- Now Hiring!!!
FAQ’s
Cart
My account

Fastec Services LLC

38898 July 21, 2022 – Posted in: Certificates

38898

Serials Include:
38898

Search Certificates:

Contact Us

Office & Repair Center
750 Circle Drive
Travelers Rest, SC 29690
Tel. 843-406-9745
Tel. 864-836-3600

NOW HIRING!!!

Industrial Metal Detector Service Center

NOW HIRING!!!